What is the Difference Between PA6 and PA66?
🆚 Go to Comparative Table 🆚The main differences between PA6 and PA66, two popular engineering thermoplastics, are as follows:
- Temperature Resistance: PA66 has slightly higher temperature resistance compared to PA6.
- Ductility: PA66 is slightly less ductile than PA6.
- Moisture Absorption: PA66 has a slightly lower moisture absorption capacity than PA6.
- Modulus: PA66 has a higher modulus than PA6.
- Wear Resistance: PA66 offers better wear resistance than PA6.
- Short-term Heat Resistance: PA66 has better short-term heat resistance than PA6.
Both PA6 and PA66 have similar chemical and physical properties, but these slight differences lead to variations in their applications and processing requirements. Mixing PA6 and PA66 for recycling purposes may result in a material with compromised properties. They are used in various markets and applications, including automotive, transportation, electrical and electronics, and consumer products.
Comparative Table: PA6 vs PA66
The main differences between PA6 and PA66 polyamides are their chemical structure, properties, and applications. Here is a comparison table highlighting the key differences:
Property | PA6 (Nylon 6) | PA66 (Nylon 66) |
---|---|---|
Chemical Structure | Made by ring-opening polymerization of caprolactam | Made by polycondensation of hexamethylene diamine and adipic acid |
Melting Point (°C) | 223 | 255 |
Properties | Better impact resistance and solubility resistance | Better rigidity and slightly higher strength |
Moisture Absorption | Faster water absorption rate | Lower moisture absorption |
Processing Temperature | Lower processing temperature | Higher processing temperature |
Both PA6 and PA66 have similar chemical and physical properties, but their differences in structure lead to variations in their properties and applications. PA6 has better impact resistance and solubility resistance, while PA66 has better rigidity and strength. Additionally, PA6 absorbs water faster than PA66, which can affect its performance in certain applications.
- Nylon 6 vs Nylon 66
- PH vs PAH
- PTFE vs PFA
- Polysulfone vs Polyethersulfone
- Polyester vs Polyamide
- Nylon vs Polyamide
- Polystyrene vs Polypropylene
- Polypropylene vs Nylon
- Polyester vs Nylon
- PFOA vs PFOS
- PFAS vs PFOS
- Polymer vs Copolymer
- PVA vs PVC
- PVC vs PVDC
- Polyurethane vs Polycrylic
- PLA vs PLGA
- Bronze vs Phosphor Bronze
- Sodium Polyacrylate vs Potassium Polyacrylate
- PFOA vs PTFE