What is the Difference Between Sweet and Sour Natural Gas?
🆚 Go to Comparative Table 🆚The difference between sweet and sour natural gas lies in the presence of hydrogen sulfide (H2S) and carbon dioxide (CO2) in the gas.
- Sweet natural gas contains trace amounts of hydrogen sulfide and is non-corrosive, less acidic, and requires little refining. It is easy to transport and handle.
- Sour natural gas contains large amounts of hydrogen sulfide and carbon dioxide, making it highly corrosive and acidic. It is difficult to handle and requires more refining. Sour gas is usually considered as such if it contains more than 5.7 mg of hydrogen sulfide per cubic meter, which is equivalent to 4 ppm by volume.
Sweetening is the process of converting sour gas into sweet natural gas by removing the acidic impurities, such as H2S and CO2. This process is essential as it prevents corrosion problems and increases the heating value of the gas. Sour gas sweetening is often achieved through energy-intensive chemical scrubbing, which may not be economically viable for gas with high concentrations of H2S and CO2. An alternative is the use of tailored polyimide membranes that can purify sour gas with a wide range of compositions.
Comparative Table: Sweet vs Sour Natural Gas
The main difference between sweet and sour natural gas lies in the presence of hydrogen sulfide (H2S) and carbon dioxide (CO2). Here is a summary of the differences in a table:
Property | Sweet Natural Gas | Sour Natural Gas |
---|---|---|
Hydrogen Sulfide (H2S) | Trace amounts | Large amounts |
Carbon Dioxide (CO2) | Only | H2S and other sulfur compounds (such as COS, CS2, and mercaptans) |
Corrosiveness | Non-corrosive | Highly corrosive |
Acidity | Less acidic | More acidic |
Refining | Requires little refining | Requires more refining |
Safety | Safer | Less safe due to H2S toxicity |
Sweetening | Not required | Required to remove acidic impurities |
Sour natural gas is characterized by containing large amounts of H2S and CO2, making it highly corrosive and more acidic than sweet natural gas. Sweet natural gas, on the other hand, contains only CO2 and trace amounts of H2S, making it non-corrosive, less acidic, and requiring less refining. Sour gas must be "sweetened" by removing its acidic impurities before it can be used or transported through pipelines.
- Propane vs Natural Gas
- Biogas vs Natural Gas
- Carbon Monoxide vs Natural Gas
- Condensate vs Natural Gas Liquids
- LNG vs LPG
- CNG vs LPG
- Gas vs Vapor
- Oil vs Gas
- Water Gas vs Producer Gas
- Liquid vs Gas
- Fuel vs Gas
- Methane vs Propane
- Biogas vs Biomethane
- H2S vs SO2
- Methane vs Ethane
- Naphtha vs Gasoline
- Natural vs Organic
- Oxygenated vs Non Oxygenated Gasoline
- Methane vs Carbon Dioxide