What is the Difference Between Tolerance and Allowance?
🆚 Go to Comparative Table 🆚The difference between tolerance and allowance lies in their definitions and applications in manufacturing and engineering:
- Tolerance: Tolerance is the amount of random deviation or variation permitted for a given dimension. It puts a limit on machining inaccuracy and is used to specify the amount of error permitted in making a part. Tolerance can be unilateral or bilateral, with unilateral tolerance defining a variation on just one side of the basic size, and bilateral tolerance varying on both sides of the basic size.
- Allowance: Allowance is a planned difference between a nominal or reference value and an exact value. It is a design feature that defines the planned deviation in dimensions of mating components. Allowance can be positive (clearance) or negative (interference). If both mating parts are not machined according to the defined allowance, the engineering fit will not function properly.
In summary:
- Tolerance is used to specify the amount of error permitted in making a part, putting a limit on machining inaccuracy.
- Allowance is a planned deviation in the dimensions of mating parts to achieve the correct mate, necessary for proper engineering fit.
It is important for design engineers and machining experts to understand the distinction between tolerance and allowance, as they are linked but different.
On this pageWhat is the Difference Between Tolerance and Allowance? Comparative Table: Tolerance vs Allowance
Comparative Table: Tolerance vs Allowance
The difference between tolerance and allowance can be summarized in the following table:
Feature | Tolerance | Allowance |
---|---|---|
Definition | Tolerance is the amount of random deviation or variation permitted for a given dimension. | Allowance is a planned difference between a nominal or reference value and an exact value. |
Purpose | Tolerance puts a limit on machining inaccuracy. | Allowance provides a reference to work against to achieve a specific engineering fit. |
Application | Tolerance is applied to parts or components that do not require contact on surfaces during operation. | Allowance is an assigned standard difference of the dimensions between two mating parts, and it can either be positive (clearance) or negative (interference). |
Values | Tolerance value is an absolute value. | Allowance value can either be positive or negative. |
Examples | - 50 ± 0.5 (tolerance) | - 25 +0.3/−0.1 (allowance) |
In summary, tolerance is about accepting and respecting differences, while allowance is about permitting or granting a specific amount or variation in dimensions. Tolerance is related to the limits of a given dimension, while allowance is an intentional difference between the dimensions of mating parts.
Read more:
- Acceptance vs Tolerance
- Allow vs Permit
- Patience vs Tolerance
- Let vs Allow
- Allergy vs Intolerance
- Food Allergy vs Food Intolerance
- Permitted vs Granted
- Accept vs Except
- Central vs Peripheral Tolerance
- Direct Write Off Method vs Allowance Method
- Discount Allowed vs Discount Received
- Compliance vs Conformity
- Permit vs License
- Exemption vs Exception
- Refuse vs Deny
- Adherence vs Compliance
- Control Limits vs Specification Limits
- Accept vs Admit
- Visa vs Permit