What is the Difference Between UTRAN and eUTRAN?
🆚 Go to Comparative Table 🆚UTRAN (Universal Terrestrial Radio Access Network) and eUTRAN (Evolved Universal Terrestrial Radio Access Network) are two different radio access networks used in mobile communication systems. Here are the main differences between them:
- Technology: UTRAN supports both Circuit Switched and Packet Switch Services, while eUTRAN only supports Packet Switch Services.
- Air Interface: UTRAN uses WCDMA (Wideband Code Division Multiple Access) based on spread spectrum modulation technology, while eUTRAN has a multi-access air interface, primarily using OFDMA (Orthogonal Frequency Division Multiple Access).
- Network Nodes: UTRAN has distributed radio network functions into two network nodes called Node B and RNC (Radio Network Controller). In contrast, eUTRAN only contains eNodeB, which performs the functions of both RNC and Node B in a single node.
- Internal Interfaces: UTRAN has internal interfaces called IuB and IuR, while eUTRAN has only one internal interface called X2.
- External Interfaces: UTRAN has external interfaces Uu, IuCS, and IuPS, while eUTRAN has S1, specifically S1-MME and S1-U, which connect the eNodeB to the Mobility Management Entity (MME) and Serving Gateway (S-GW), respectively.
In summary, eUTRAN is an evolution of UTRAN, designed to provide higher data rates, lower latency, and optimize packet data. It uses an entirely new air interface system and has a simplified network architecture compared to UTRAN.
Comparative Table: UTRAN vs eUTRAN
UTRAN (Universal Terrestrial Radio Access Network) and eUTRAN (Evolved Universal Terrestrial Radio Access Network) are radio access network architectures for 3G UMTS and 4G LTE systems, respectively. Here is a table highlighting the differences between UTRAN and eUTRAN:
Feature | UTRAN | eUTRAN |
---|---|---|
Radio Access Technology | WCDMA, based on spread spectrum modulation | LTE-Uu, using OFDMA and SC-FDMA |
Services | Supports both Circuit Switched and Packet Switch Services | Only supports Packet Switch Services |
Network Nodes | Node B and RNC (Radio Network Controller) | eNodeB, which performs functions of both RNC and Node B |
Internal Interfaces | IuB, IuR, and X2 | X2 only |
External Interfaces | Uu, IuCS, and IuPS | S1 (S1-MME and S1-U) |
Some key differences between UTRAN and eUTRAN include:
- UTRAN supports both Circuit Switched and Packet Switch Services, while eUTRAN only supports Packet Switch Services.
- UTRAN has a distributed Radio Network function with Node B and RNC, while eUTRAN only has eNodeB, which performs the functions of both RNC and Node B in a single network node.
- UTRAN has internal interfaces such as IuB, IuR, and X2, while eUTRAN has only the X2 interface.
- UTRAN has external interfaces such as Uu, IuCS, and IuPS, while eUTRAN has S1-MME and S1-U (specifically S1-U) as its external interfaces between eUTRAN and the Core Network or EPC.
- UTR vs Intron
- UMTS vs WCDMA Network Technology
- E1 vs T1
- UHF vs VHF
- Transport vs Transportation
- EU vs UN
- NTU vs FTU
- UN vs NATO
- Thymine vs Uracil
- GATT vs GATS
- HSDPA vs HSUPA
- GSM vs 3G Network Technology
- UN vs WTO
- 4G vs LTE
- ATM vs Frame Relay
- LTE vs VoLTE
- G711 vs G729
- CDMA vs LTE Network Technology
- FDD LTE (FD-LTE) vs TDD LTE (TD-LTE) Networks